EC ACRYLICSTRIP

AcrylicStrip is a solvent-based sealer, stain, and paint remover that has a diverse array of uses. It effectively eliminates acrylics, acrylic latexes, polyurethane, and various other resin coatings, making it particularly adept at eliminating curing compounds from concrete surfaces.

Product Details
• Removes curing compounds from concrete
• Works quickly

Pre-Testing
Always test prior to beginning full-scale stripping
operations. Pre-testing will determine suitability and
effectiveness on each type of surface and material
designated to be stripped. Pre-testing will also
determine dwell times and number of applications
required to achieve desired results. Pre-testing will
show any potential or adverse reactions to adjacent
surfaces. Allow test areas to thoroughly dry before
evaluating final appearance and results.

Preparation
Protect adjacent surfaces and surrounding building
hardware not intended to be stripped from exposure
to the stripping agent. Cover landscape using
polyethylene or other proven protective material.
Avoid wind drift on surrounding surfaces as well as
auto and pedestrian traffic.

Dilutions
AcrylicStrip is always used undiluted

Rinsing
Use only cold water to rinse. Proper rinsing techniques
determine the final look and quality of the job. A
thorough rinse job is always recommended; however,
our chemistry never requires flooding the surface.
AcrylicStrip should be rinsed using cold water using
either a pressure washer, garden hose, or water and
brush. When using a pressure washer on wood, be
sure to keep the nozzle at least six inches from the
surface. Pressures that mark the surface should be
avoided. When in doubt, follow the manufacturers
recommended P.S.I. for the substrates.

Coverage Rates
Coverage rates will vary based on porosity, severity
and type of coating, application method, and other
factors. Proper testing will determine actual coverage
rate.

Safety Information
Always wear goggles and chemical resistant gloves
when handling this product. Read the Safety Data
Sheet for additional safety and health hazard
information prior to use. Do not get in eyes, on skin,
or on clothing. Do not wear contact lenses when using
this product. If material comes in contact with clothing,
wash before re-use. Do not dilute this product. Do
not use any other application other than specified in
the application instructions. Keep container closed
when not in use. Use with adequate ventilation. Use
NIOSH/MSHA approved respiration devises when
adequate ventilation is not available. Take precautions
to avoid exposing building occupants to fumes. Do not
remove the label from the container. Dispose of empty
containers in accordance with federal, state, and local
requirements

SHIPPING HAZARDOUS, SHIPPING COST INCREASED